All molds are made upon order, with a turnaround time of approximately 7 days. Size and other details are noted on the photo but if there are any questions, feel free to send a message through Instagram or FB.
This is a silicone mold for 8x of straw topper attachments. This will enable you to attach almost anything with a flat back to the cast piece and use them as a straw topper. The cast piece will come out to 0.75 inches wide and as long as the front/design piece is at least 0.8 inches wide at its narrowest/ midpoint, it will work. The hole is 8mm and works with most reusable straws/cups that I have encountered except for the boba straws. :P Please check your straws to make sure it fits. I use Gorilla Contact Adhesive, sometimes E6000...it is a matter of preference.